Skip to main content

Tec 3508

Cordless Industrial 43mm Hot Melt Applicator

The Tec 3508 is a cordless industrial level hot melt applicator designed to tackle any application without the constraint of power cables. Primarily used in the construction, precast, and product assembly industries, the Tec 3508 comes with a set of specific temperature modules so you can tailor the temperature to suit your application needs.

Cordless Operation

Fully-portable tool for more control with no trip hazards. Includes over-discharge protection to ensure battery safety.

Temperature adjustable

The Tec 3508 comes with five temperature modules to ensure the adhesive is applied at the optimum temperature for the job in hand.

High output

Able to dispense around 4kg per hour at optimal temperature for the adhesive used, the Tec 3508 allows you to speed up your production processes.

Full hand trigger

Adjustable metal trigger ensures maximum comfort and greater stability during extended periods of use.

On/Off Switch

Addition of an On/Off switch to give users more control and minimize wasted energy.

Auto Shut-Off

Tool automatically shuts off after 15 minutes to reduce energy consumption and the risk of glue melt back.

Cordless Operation

The ultimate cordless hot melt solution

The Tec 3508-43 is an extremely high output cordless hot melt applicator providing users a fully portable 43mm tool for industrial applications. Running on the DeWalt Flex volt battery system * it is the first 43mm cordless hot melt applicator on the market. The tool delivers approximately three hours of runtime on a 9Ah battery, with over-discharge protection for maximum safety (6Ah and 12Ah batteries can also be used).

Guaranteeing precise temperature control, the Tec 3508 comes with a selection of plug-in modules from 130°C to 215°C that automatically change the internal heater temperature. Not only does this ensure optimal conditions for the bonding application, but depending on the adhesive used, these modules can change the bonding properties of the grade to suit the job at hand.

Registered trademarks are proprty of their respective owners

Please note: “DEWALT®” and “FlexVolt” are registered trademarks of The Black and Decker Corporation. The trademark owner and its brands have no association or affiliation with Power Adhesives or any Power Adhesives product.

Crafts Meet Quality Glue

Precast Approved

Its class-leading melt rate of 3kg/hr, when combined with the range of 43mm Tecbond adhesives ensures efficient adhesive flow, while its smaller trigger and handle over moulding gives a more comfortable grip and greater stabilisation.

Featuring an on/off switch for greater control and an auto shut-off for better energy consumption and decreased risk of adhesive meltback, the Tec 3508 is the premium choice among cordless hot melt applicators.

Class-leading melt rate

Test 2!

Get in touch

Tec 305

DIY & Trade Hot Melt Applicator
Economical, industrial 12mm hot melt applicator. Lightweight and easy-to-use with output of 900g/hr. Available in hot and low melt variants.

Tec 308

Cordless DIY & Trade Hot Melt Applicator
Lightweight, industrial cordless 12mm hot melt applicator. Features eco-mode setting to extend battery life. Output of 1kg/hr. Compatible with Tec Applicator battery adapters.

Tec 806

Professional Hot Melt Applicator
Professional, light industrial 12mm hot melt applicator for higher output. Output of 1.7kg/hr. Available in hot and low melt variants. Available in 15mm (⅝”).

Tec 808

Cordless Professional Hot Melt Applicator
Medium size, cordless 12mm hot melt applicator. Features eco-mode setting to extend battery life. Output of 2kg/hr. Compatible with Tec Applicator battery adapters. Available in 15mm (⅝”).

Tec 830

Temperature Adjustable Hot Melt Applicator
Heavy-duty, industrial 12mm hot melt applicator with adjustable temperature via modules between 130°-215°C. Output of 2.5kg/hr. Available in 15mm (⅝”).

Tec 3500

High Output Industrial 43mm Hot Melt Applicator
High output, industrial 43mm hot melt applicator with adjustable temperature via modules ranging between 130°-215°C. Output of 3.4kg/hr.

Tec 3508

Cordless Industrial 43mm Hot Melt Applicator
High output, cordless 43mm hot melt applicator with adjustable temperature via modules ranging between 130°-215°C. Output of 3.2kg/hr.

Tec 6100

Very High Output 43mm Hot Melt Applicator
Extremely high output, pneumatically assisted 43mm hot melt applicator. Requires compressor and electrical supply. Output of 4.1kg/hr.

Tec 6300

Very High Output 43mm Hot Melt Spray Applicator
Extremely high output, unique swirl-based 43mm spray adhesive applicator using compressed air and electricity. Output of 4.2kg/hr.

Tec 7100

Extremely High output Industrial 43mm Applicator
Extremely high output, pneumatically-assisted 43mm hot melt applicator. Additional speed loader for extended use. Requires compressor and electrical supply. Output of 5kg/hr.

    Applications for your Tec 3508